The technique for the way to remove drywall texture depends upon the material being removed and the situation of the wall. A popped nail is not holding within the stud and backs out of the drywall, creating a popped nail head. Set the drywall patch in place and screw it into the furring strips, sinking the screws beneath the floor of the drywall. End all repairs with a remaining mild sanding to make sure a satin easy end and seamless mixing between the patch and the wall.
Now it’s time to minimize a patch. It’s superb to fill screw holes and different small wall dings with patching compound, however for dime-dimension and bigger repairs, and for holes which are deep, it’s best to use a joint compound that units up by a chemical response.
Bubbled tape seems when the tape has not been completely embedded into the joint compound or the bond has been unsuccessful. Skilled drywall tapers always fill a row of screw holes with one lengthy stripe of joint compound, quite than filling every screw gap separately.
This patch could require two coats of compound, with dry time in between coats. Once it’s dry, apply a second coat and feather it to blend the patch with the wall. When you remove a nail, drywall anchor or image hanger, there is often a bit ridge of outdated paint or drywall sticking out that’s hard to cowl with patching material.
First, lower a bit of drywall that is barely bigger than the opening you are trying to restore. Watch for the primer to dry, then sand the uncovered drywall edges to remove paper nubs. Cover the crack with mesh tape, then cover the tape and the nook bead with joint compound.